How Long Does Mold Remediation Take In Homes And Businesses?

How Long Does Mold Remediation Take For Home And Businesses In Idaho?

How Long Does Mold Remediation Take In Homes And Businesses?Most mold remediation, or removal, projects take between one and five days. The timeline and scope of the work depend on how much mold there is, what it’s growing on, and where it’s located.

In particular, the cost and time it takes to remove the mold go up when the infestation is in hard-to-access areas. That’s usually behind your walls. In that case, you’re also dealing with the costs to remove and replace building materials.

Mold remediation can be disruptive and expensive. But, if your family or business are suffering from physical ailments due to exposure, it’s necessary. Not only for your health but also for your home or commercial space. Eventually, that damage can become a structural issue.

Related: Mold Toxicity And Physical Symptoms

Unfortunately, HydroKleen208 can’t help you with large-scale mold removal. Our specialty is mini split and heat pump cleanings. That’s just one small part of remediation and preventing a problem in the first place. But, it’s an important one.

Related: How Mold In Ductless Mini Splits Cause Biotoxin Illness

We’ll talk a little more about how we can prevent a mold problem from taking hold or returning in your Treasure Valley or Boise Metro home or commercial space. For now, let’s look at what to expect when you call a professional.

What Happens During Mold Remediation

A typical mold remediation job follows these steps:

  • Repair Plumbing Problems
  • Isolate Contaminated Areas
  • Eradicate Airborne Pollutants
  • Remove Infested Materials
  • Dry All Wet Materials
  • Clean And Disinfect Infested Areas
  • Replace Or Rebuild As Necessary

The timeline and cost for your home will depend on how bad of an infestation you have. In the worst cases, remediation includes replacing wooden joists or beams that are soft and compromised from mold growing on it.

You’ll also notice that the process includes getting rid of airborne spores. We’ll touch on that more later.

Preparing For Mold Remediation

Your first step toward preparing for mold remediation is getting an air quality sampling or test. Do this before your mold removal company does an inspection, so they have more information to start with.

Next, the removal company inspects everything visible — in other words, they can’t see what’s behind the walls. But, they’ll look for signs of hidden problems.

Home Preparation

First, don’t get rid of anything before the removal begins. Moving furniture or large objects spreads spores to different parts of the house.

Next, document and take pictures of all signs of mold damage before work begins. That way, you can ensure your removal company addresses everything. And you have evidence for an insurance claim or lawsuit.

Related: Toxic Mold Legal Claims

Finally, make arrangements for your pets to stay somewhere else. In severe cases, you’ll want to leave for a few days as well.

Commercial Space Preparation

Before calling a professional, a property manager or landlord should take mold remediation steps. These involve assessing the square footage of moly areas, noting any water damage, cleaning small instances of mold growth, addressing moisture and humidity problems, and investigating any occupant complaints. 

Related: Indoor Air Toxins And Their Symptoms: Boise Metro, Valley County Homes

Assign a mold remediation manager if there’s a persistent problem. And, consult a professional removal company if you’re finding signs of mold throughout the building or if it keeps coming back. 

Order an air quality test before a professional mold inspection, and communicate with your employees, occupants, or tenants about any remediation steps.

Risks Of Mold Returning After Remediation

There’s always a risk of mold returning after remediation. Even if the removal company did everything right, new spores could take hold if you don’t address the conditions that caused the problem in the first place.

One of the biggest drivers of mold infestation is excess humidity in your home. Keeping the relative humidity between 30 and 50 percent at all times significantly reduces the risk of more mold.

Related: What Is The Best Temperature To Prevent Mold Growth In My Home?

Next, avoid clutter and regularly clean behind large appliances. Use exhaust fans in the bathroom and kitchen to get rid of steam and moisture.

Your HVAC system can help by dehumidifying the air and eliminating standing water. But, it can also pose a risk — especially if you have a ductless system.

Mold Buildup (And Risks) With A Ductless Mini Split System

Over the years, we’ve discovered that ductless mini splits become infested with mold and other microbial contaminants very easily. HydroKleen identified the problem more than a decade ago in countries where ductless systems have been much more common for a long time.

The problem is that, for a long time, there was no good way to clean out the air handlers and heat pumps. Even a professional HVAC company would have to take hours to disassemble everything,

Then, they’d need to scrub every component manually. That gets incredibly time-consuming once you get to the tiny ridges between each fin on a condenser coil.

But, those coils in the air handlers are prime breeding grounds. For example, here’s a picture of a dirty coil we came across:

A Ductless System Can Get Moldy If Not Taken Care Of

That’s why HydroKleen Global developed a unique system especially for flushing out and sanitizing mini split air handlers and heat pumps. With over a decade of ongoing R&D behind the process, our parent company has cleaned more than 1.5 million systems in 45 countries. 

Related: HydroKleen’s Cleaners And Process Are 100% Environmentally-Safe

Now, HydroKleen208 brings that expertise to Boise Metro and Valley County homes and businesses. Clients immediately notice improvements to their indoor air quality and comfort. They can even see it! 

Here’s another picture of a dirty coil. But this time, we cleaned half of it so you can see the difference:

You Can See How Dirty A Mini Split System Can Get

Related: How Often Should A Mini Split Be Cleaned?

Mini Split Cleaning In Eagle, ID

HydroKleen208 provides fast, effective, environmentally-friendly, and non-invasive mini split cleaning in Eagle, ID and across Boise Metro and Valley County. We bring more than a decade of research and development to ensuring your ductless system stays mold-free. To learn more or schedule a cleaning, call (208) 779-5596.